Replacement Handles For Windows
Window handles are one of the most frequently used elements of your double glazed windows. Over time, they may get worn out or rusted.
To replace a UPVC window handle, you have to know the spindle length of your existing handle and also its fixings. This can be done by examining the base of the handle that was previously used.
Handle
Over time uPVC window locks and handles may be damaged due to wear and tear or intentional or accidental damage. It could be that the lock or handle becomes difficult to close or open, or that they are not even locked. It may be tempting to replace the entire window unit if this occurs, but it's not always required. Most of the time, it's the situation that a new handle or lock is sufficient.
The most popular type of uPVC window handle is the espagnolette. This handle has a spindle that protrudes from the handle. It is inserted into a gearbox that operates the multipoint locking mechanism inside the window. It's important to match the correct handle and lock to your windows to ensure that they function properly, which is why we have a wide range of replacement handles for all types of uPVC windows.
When replacing the uPVC window handle it is an ideal idea to use screws with cover caps to secure the screws and prevent them from rust. You can also make use of a spacer, washer or other sealant to create an even tighter fit. A screw cap in place will also prevent debris and water from getting into the handle and damaging the handle.
Once upvc replacement door handles has been removed from the window, it's recommended to wash the spindle of the new handle, as well as the threaded part of the bolt. This will ensure that the new handle is able to fit and function correctly, and will also keep any dirt from getting into the multipoint lock.
The next step is to install the uPVC handle. You should carefully go through the directions that come with the new handle and look at your previous one to get a better understanding of how it's done. The process is usually simple. If you have any issues that aren't covered in this guide, we recommend contacting our team to get more information.
It is important to note that when replacing the uPVC Cockspur (also called Espag handle), you will require the step height of your window to determine the right size handle. The step height refers to the distance from the base or frame of the window to where the nose of the cockspur handle is located when it is installed.
Hinges
If your windows are beginning to close and open with a visible gap, this could be due to the hinges not being in line with the frame. It's usually a simple fix that can be resolved with a set of replacement hinges. We have a variety of different options, and can even customize the size of the hinges to fit your needs.
We can supply different types of hinges for upvc and timber windows. The hinges are available in different colours to match the existing window frames. They are also supplied with all the fixings you need for installation. If you have a double-glazed window that has an older style of hinge, we are able to provide a variety of repair screws which permit you to cut the thread from the previous form back into the frame.
We offer a range of hinge styles that range from conventional casement hinges for windows that can be used with a standard or tilt and turn handle up to fire escape egress hinges designed for use on larger-sized side hung windows. These are designed to be opened fully in an emergency and incorporate an easy-clean position for ease of cleaning. We also stock restricted-egress hinges designed to restrict the opening angle of a window to 100mm maximum. This is ideal for households with children.
A squeaky hinge could be an indication that the hinges are wearing out, and this is usually due to the rubbing of metal against. If the noise is still present an ounce of lubricant will aid.
This is due to plumb windows being in a position to avoid binding. The operating sash is aligned with the frame, and the window will close and open in a proper manner. If a window is not plumb may begin to open and close without difficulty, or it could get warped over time, creating problems for the seal as well as the appearance of the window.
You can buy replacement windows hinges made of upvc that are available in imperial or metric sizes. The sizes that are metric tend to be more precise, but this isn't really noticeable when they are installed. The first corner holes on the track are standard, however, the rest of the holes may differ based on the original hardware. It is important to measure the holes in your frame to make sure that the hinges made from upvc you purchase are the correct size.
Crank
Normal wear and tear over time can result in damage to the window handle, lock, or crank mechanism. This can affect the ease of opening and closing your windows, as well as compromising their security. If you notice that your window is difficult to open or close, or hear a clicking noise when you turn the handle, it could be an indication that you need to replace the crank mechanism. If you are unable to lock your window, or the multipoint lock is damaged it might be worthwhile to consider replacing this component of the hardware, too.
A new window crank can be replaced with little effort, but you need to buy the correct size replacement. You can determine if the replacement has the exact same height of step as the previous one by measuring the distance from the guide for the crank arm bushing to the notch on the track at the bottom of the frame. You can also take a measurement of the length of the spindle that is on your existing handle to find out what size you require to replace it with.
The type of window handle you have will determine the type of crank mechanism is required for your casement or awning windows. Espag handles have a mental spindle on their back that is attached to the frame of the window, and drives the window mechanism, while cockspur handles feature pegs which are fixed in place by screws of three or four which are fitted into the frame and sash.
It's easy to replace your window operator once you have identified the correct replacement. First, take off any trim mounting screws on the window's casement cover and then carefully lift it off to reveal the window operator innards (Photo 1). Remove any rusted trim screws and then compare the new operating lever with the previous to ensure they match. Then, attach the replacement to the window frame, replacing any screws that were rusted or bent, and place the casement cover over the mechanism.